Facade · plinth · interior feature wall
WPC wall cladding
WPC wall cladding is a 3-metre, 241 mm wide board fixed with stainless screws onto a ventilated batten frame. It gives your facade the look of wood without painting, and moisture escapes through the air gap left behind it.
On WPC, timber or aluminium battens
Ventilated system
Horizontal or vertical
Samples in both showrooms
Colours
One profile, seven colours. The image shows the board you select; the ribbing is the same on all of them, only the shade changes.
Anthracite · anthracite grey, brushed, 3D ribbed finish
A brushed surface with fine 3D ribbing: light runs along the ribs, so the wall stays lively rather than a flat colour surface. It suits exterior facades and interior walls alike, and can be laid horizontally or vertically.
Per square metre: 4.15 linear metres, i.e. 1.4 boards — roughly 25 900 Ft/m²
List price incl. VAT, the same for every colour. When you request a quote, we give you the current price for your quantity.
Colours (7) · Anthracite
Available lengths
- 3 m
The board comes in 3-metre lengths, and we cut it to size on site.
- Board
- 3000 × 241 × 36 mm
- Coverage
- 0.72 m² / board
- Structure
- Hollow-core
- Warranty
- 1 + 10 years
How does it go on the wall?
As a ventilated system: battens go onto the existing wall — WPC, timber or aluminium — and we fix the boards to them with stainless screws, in pre-drilled holes. Between the boards we leave the gap needed for thermal expansion (±2 mm per metre).
The air gap left by the battens is not an optional detail: this is where moisture and vapour that get behind the cladding escape, so the wall and the back of the board dry out. Proper ventilation is also a condition of the warranty.
Corners, window reveals and the finishing edge of the cladding are covered with an L-profile. The manufacturer recommends the board for outdoor and indoor use alike: the same system goes on facades, columns, ceilings and interior walls.
Quantities and site survey
Send us the dimensions of the area to be clad and the openings, and we will tell you how many boards, how many battens and how many screws you need. You can also see the boards in person in our showroom.
Request a quote Showrooms and opening hours
Accessories for wall cladding
The board price covers the cladding; the frame and fixings are made up of these.
Battens (WPC, timber or aluminium)
The base of the ventilated frame: we screw the boards onto them, and behind the boards remains the ventilation gap through which moisture escapes.
We price them together with the cladding in your quote.
Stainless screw
We fix the boards to the battens with through screws, in pre-drilled holes, so that there is room for thermal expansion. Stainless fixings are a condition of the warranty.
We price them together with the cladding in your quote.
L-profile edge trim
Corners, window reveals and the finishing edge of the cladding: it hides the board ends and the frame running behind them.
We price them together with the cladding in your quote.
Cleaning
1–2 times a year: soak thoroughly with water, scrub with warm water and soap or washing-up liquid and a brush, then rinse. Do not use bleach, ammonia or similar products.
We price them together with the cladding in your quote.
Frequently asked questions
How much does WPC wall cladding cost?
A 3-metre board is 18 750 Ft at list price incl. VAT. One square metre takes 4.15 linear metres, i.e. about 1.4 boards, so the cladding material comes to roughly 25 900 Ft/m². The frame and fixings come on top. When you request a quote, we give you the current price for your quantity.
How many boards do I need per square metre?
The board is 241 mm wide, so one linear metre covers 0.241 m²: a square metre takes 4.15 linear metres, and one 3-metre board gives 0.72 m². For larger areas we add an allowance of 5–10% for openings and cutting waste.
Is it suitable indoors, or only for facades?
Both: the manufacturer recommends it for outdoor and indoor use alike, on facades, columns, ceilings and interior walls. Same board, same fixing; outdoors, ventilation is essential so that moisture can escape from behind the cladding.
How is it fixed to the wall?
As a ventilated system: battens go onto the wall (WPC, timber or aluminium), and we fix the boards to them with stainless screws, in pre-drilled holes, leaving a gap for thermal expansion (±2 mm/m). It can be laid horizontally or vertically. We give you the exact frame layout for your wall after the site survey.
Why does the cladding need an air gap behind it?
In the air gap held open by the battens, moisture and vapour that get behind the cladding can escape, so the wall and the back of the cladding dry out. Proper ventilation is also a condition of the warranty.
Does it fade or warp over time?
The profile withstands rain, frost and UV; it does not warp or crack. In the first 3–6 months the surface lightens by 5–10% as the colours settle; this is a natural property of the wood fibre content, not a defect. It needs no painting or staining, and cleaning is a wash with warm soapy water and a brush once or twice a year.
What warranty does it come with?
All WPC DECK wall cladding comes with a 1-year full warranty, plus a further 10 years against rot caused by fungi or pests, provided you register the purchase within 60 days and the cladding is installed according to the installation guide. The warranty covers the WPC system components; corrosion of fixings that are not stainless is not covered.
For a unified look outdoors: the same colours are also available as fence boards and decking.