Outdoor fencing · no painting needed
WPC fence boards
A WPC fence board is a 180 mm high profile pressed from a blend of wood fibre and polymer, fixed to a box-section frame to build the fence. It does not rot or splinter and needs no staining: the colour runs through the material. Three finishes, 20 colours, lengths of 3–5 metres.
No painting or staining
Lengths of 3, 4 and 5 metres
Made in Europe
Samples in both showrooms
Finish and colour
Choose the finish first: it decides whether your fence will be modern and single-coloured, subtly grained or boldly wood-grained. Then choose the colour. The image shows the board you select.
Anthracite · anthracite grey, sanded finish
An even, finely sanded surface with no visible wood grain. This is the choice for modern, clean-lined fences: from a distance it reads as a single, uniform colour.
Offer ends: 01/10/2026
List price incl. VAT, the same for every colour. When you request a quote, we give you the current price for your quantity.
Colours (7) · Anthracite
Available lengths
- 3 m
- 4 m
- 5 m
A 3-, 4- or 5-metre section comes out of a single board with no cutting waste.
- Profile
- 180 × 15 mm
- Structure
- Hollow-core
- Weight
- 1.7 kg/m
- Warranty
- 1 + 10 years
Anthracite · anthracite grey, brushed finish
A brushed surface with a fine pattern running lengthways, along the grain. It is the middle ground between sanded and 3D wood grain: not a flat colour surface, yet the wood grain is not pronounced either, so we recommend it for more understated wood-look fences.
Offer ends: 01/10/2026
List price incl. VAT, the same for every colour. When you request a quote, we give you the current price for your quantity.
Colours (7) · Anthracite
Available lengths
- 3 m
- 4 m
- 5 m
A 3-, 4- or 5-metre section comes out of a single board with no cutting waste.
- Profile
- 180 × 15 mm
- Structure
- Hollow-core
- Weight
- 1.7 kg/m
- Warranty
- 1 + 10 years
Anthracite · anthracite grey, 3D wood grain finish
Deep, lifelike wood grain along the full length of the board. It looks like wood even up close, so we recommend it for a traditional street view that recalls a timber board fence.
Offer ends: 01/10/2026
List price incl. VAT, the same for every colour. When you request a quote, we give you the current price for your quantity.
Colours (6) · Anthracite
Available lengths
- 3 m
- 4 m
- 5 m
A 3-, 4- or 5-metre section comes out of a single board with no cutting waste.
- Profile
- 180 × 15 mm
- Structure
- Hollow-core
- Weight
- 1.7 kg/m
- Warranty
- 1 + 10 years
How is the fence built?
The boards are not load-bearing: they go on a frame built from 40 × 40 × 2 mm iron, steel or aluminium box section, with posts no more than 80–100 centimetres apart, in sections of up to 5 metres. The board is 180 mm high, and we leave a gap of at least 4 mm between boards for thermal expansion (±2 mm per metre), so one metre of fence height takes 5–6 rows.
The boards can be laid horizontally or vertically. We pre-drill every screw point (a 5.5–6 mm hole for a 4.8 mm screw), at least 30 mm from the edges, and never fix the board rigidly. The edges of the section are closed with an aluminium U-profile and the cut board ends with an end cap; install in dry weather, at +15 °C or above.
The colour runs through the material, not just the surface: in the first 3–6 months the surface lightens by 5–10% and the colours settle. Maintenance means cleaning once or twice a year with warm soapy water and a brush; no painting or staining needed.
We help you with quantities
Bring the length of the fence and the planned height, and we will tell you how many boards, how many U-profiles and how many fixings you need. You can handle the samples on site before you decide.
Request a quote Showrooms and opening hoursAccessories for your fence
Alongside the boards, these four items complete the fence. Each is available matched to the board colours.
Aluminium U-profile
Holds the boards next to the post and finishes the section; available in several lengths, matched to the board colours.
We price them together with the boards in your quote.
Stainless bimetal screw
Stainless fixing to a steel box section (Ø 4.8 × 38 mm), with a head painted to match the boards; pack of 50. It goes into a pre-drilled 5.5–6 mm hole so that the board can move.
We price them together with the boards in your quote.
Gate hinge bolt + nut
For through-bolting gates and more heavily loaded sections, with a head painted to match the board colour.
We price them together with the boards in your quote.
End cap
Seals the cut end of the hollow-core board: tap it in with a rubber mallet, and glue it for a lasting finish; on vertical boards only at the top, the bottom stays open. Pack of 10.
We price them together with the boards in your quote.
German partner brands
Premium alternative: megawood® LIMES and torroTIMBER® rhombus slats
In solid German GCC material: the megawood LIMES panel fence with wave-top or sawtooth panels, its own posts and gate; and rhombus slats of 20.5 × 81 mm with hidden clips, from both brands. Supplied to order.
megawood® LIMES fence system
Augusta fluctus and serra panels in 270 mm, the solid Valeria panel, round / octagonal / square / oval posts, a lockable gate, factory-made to size.
The LIMES system →
torroTIMBER® rhombus slats and planks
Rhombus slats in nine colours, 4.2 m long, with a 40 × 112 plank and oval post to go with them: a slatted fence in German GCC material.
The torroTIMBER range →
Our completed projects
Fence references
Fences we have built and manufacturer references, with no retouching.
Frequently asked questions
How much does a WPC fence board cost?
At list price incl. VAT, the sanded WOW Fine is 2 500 Ft/m, the brushed WOW Noble is 2 950 Ft/m, the 3D wood grain woodbe Spirit is 3 240 Ft/m. The price of a 3, 4 or 5-metre board can be worked out from these. When you request a quote, we give you the current price for your quantity.
How many boards do I need for one metre of fence?
The board is 180 mm high, and we leave a gap of at least 4 mm between boards for thermal expansion, so one metre of fence height takes 5–6 rows. For a 5-metre section, that means one 5-metre board per row, with no cutting waste; the board may overhang the supporting frame by no more than 5 cm.
What is the difference between the sanded, brushed and 3D wood grain finishes?
The sanded finish is even, with no wood pattern, so it gives a modern fence with a uniform surface. The brushed board has a fine pattern running lengthways, along the grain, which breaks up the light without a pronounced wood grain: it is the middle ground between the two. The 3D wood grain board has deep wood grain running its full length and looks like wood even up close; it comes closest to a traditional timber board fence.
Does a WPC fence need painting or staining?
No. The colour runs through the board rather than sitting on its surface, so it does not flake or wear off. In the first 3–6 months after installation the surface lightens by 5–10% and the colours settle; this is a natural property of the wood fibre content. Maintenance means cleaning once or twice a year with warm soapy water and a brush, without bleach or ammonia.
What kind of frame do the boards go on?
On a frame built from iron, steel or aluminium box section (40 × 40 × 2 mm), with posts no more than 80–100 cm apart, in sections of up to 5 metres. We fix the boards with stainless screws driven into pre-drilled holes (5.5–6 mm for a 4.8 mm screw), at least 30 mm from the edges, never rigidly, so there is room for thermal expansion. The edges are closed with an aluminium U-profile, and the board ends with end caps. The board is not a load-bearing element; it may only be used as fence cladding.
What warranty does it come with?
Every WPC DECK fence board comes with a 1-year full warranty, plus a further 10 years against rot caused by fungi or pests, provided you register the purchase within 60 days and the fence is built according to the installation guide. The warranty covers the system components; corrosion of fixings that are not stainless and installation that does not follow the instructions are not covered.
Can I see the colours in person?
Yes, the Woopla showrooms in Budaörs and Békéscsaba keep a sample of every colour. The shade you see on screen always differs from the real surface, so it is worth handling the board before you decide.
Planning a terrace next to the fence? Take a look at our WPC range.